LAUNCH
X-431 PADII
User's Manual
37
9.2 About Endoscope
1
3
4
2
6
5
Fig. 9-1
1
Snapshot button:
To take a snapshot of the current view
and save it to your LAUNCH diagnostic tool as an image.
2
Flexible tube:
You can bend the neck to get in to hard-to-
reach places and even if it is not straight, it can still give you
pictures of what the camera is looking at. (
Note:
Do NOT
force it too hard while bending the neck into strange shapes.
)
3
Dial for LED light brightness:
There are 4 LED lights in the
lens that act like a torch to illuminate dark spots where the
camera can not see well. This dial allows you to adjust the
light brightness.
4
Handle
5
Camera with 4 adjustable LED lights:
The camera head
is water-resistant and is where you can attach the useful
optional accessories (magnet, mirror, hook) add-on.
6
USB cable:
Connect it to LAUNCH diagnostic tool for viewing
what the camera captures.
9.3 Technical Parameters
Resolution
640 x 800 pixel (VGA)
Frame Rate
30fps (pictures/sec)
Image Sensor
1/12" CMOS
White Balance
Automatic
Exposure
Automatic
Light Source
4 adjustable LEDs
USB Port
USB1.1/2.0/3.0
Power Supply
5V via USB
Ambient temperature
0 to +65
o
C
USB Cable Length
Approx. 2000mm
Probe & Camera Length
1030mm
Probe Cable Length
830mm
Min. Bending Radius
50mm
