Launch VALUE-100, User Manual

Page: 37 / 50

LAUNCH VALUE-100 A/C Service Station User’s Manual
value. (In this phase, take care that nothing touches the scale plate).
Place the reference weight (16 to 18 kg) carefully at the center of the
scale plate and check that the displayed value increases accordingly.
Press the SEL key and use the + e ARROW keys to type in the 4
figures of the reference weight. Press ENTER. The display reading
should be the reference weight minus the weight of the empty bottle
(ca. 6.1 kg).
Remove the reference weight. Switch off the machine and
disconnect from mains supply. Replace the bottle in its seat on the
scale plate. Switch on the MACHINE, taking care not to touch any
electrical wires. Check calibration: place a known 0.5 kg or 1 kg
reference weight on the bottle and check that the displayed
availability value increases by the value of the known reference
weight ±2%. Remove the reference weight. Switch off the machine
and disconnect from mains supply. Screw down the bottle lock nut
(3). Open the red and blue bottle taps. Replace the rear cover.
ADDITINAL SETTINGS
CHANGING THE UNITS F MEASURE (kg lbs or lbs kg)
Press the SEL, START, and ENTER keys simultaneously. Switch
on the machine. The machine will change from one system of units of
measurement to the other.
PRINTER (PTINAL)
If the printer is installed, the machine prints a summary slip at the
end of each operation.
LEGEND
Availability: Recovery:
Vacuum: Charging: