Launch VALUE-100, User Manual

Page: 28 / 50

LAUNCH VALUE-100 A/C Service Station User’s Manual
(T6) SEL key: Selects the operation to be performed. Every time
this key is pressed one of the LEDs from T1 through T4 will light in
sequence; the LED alongside each operation indicates that the
operation may be started or that it is being performed (flashing LED).
(T7) + key: Each time this key is pressed during the operations
relative to setting the time and the quantity, the value of the flashing
digit on the display will be increased by one unit.
(T8) ARROW key: Each time this key is pressed while a display
value is flashing during the operations relative to setting the time and
the quantity, a different digit will be selected for modification
(selected digit will flash).
(T9) ENTER key: Pressing this key when a LED corresponding to
an operation is lit but not flashing will permit modifying the times and
the fluid quantities. Upon completion of modification, press the key
again to confirm the datum
(T10) START key: Pressing this key will start the operation
indicated by the lighted LED
(T11) STOP key: Pressing this key will stop the operation
indicated by the flashing LED.
(T12) TEMPERATURE key: Pressing this key the display will
show the bottle temperature in Celsius degree and Fahrenheit
degree.
(T13) Display: According to the operation selected, displays the
time or refrigerant quantity values.
STATUS AND ALARM PANEL
See fig 10:
(C1) HEATER ON: Lights to indicate that the electrical resistance
of the machine is heating the bottle to maintain fluid pressure
between 5.5 and 8,5 bar. The resistance does not operate during the
RECOVERY phase of operation
(C2) HIGH PRESSURE: Lights and emits an acoustic signal when
the pressure of the fluid in the circuit catch up 17.5 bar. The
RECOVERY operation is automatically interrupted.
(C3) FULL BOTTLE: Lights and emits an acoustic signal when the
bottle is full to more than 80% capacity (that is, 10 kg). The Recovery
operation is automatically interrupted.
(C4) EMPTY BOTTLE: Lights and emits an acoustic signal when
the quantity of refrigerant fluid contained in the bottle is low (2 kg). in
order to avoid the emission of non-condensable gases. Fill the bottle