background image

LAUNCH                                                                                                                      TWC-711TMB Tire Changer User's Manual 

Trademark Information 

LAUNCH is a registered trademark of LAUNCH TECH. CO., LTD. (LAUNCH for short) in China and other countries. All other 

LAUNCH trademarks, service marks, domain names, logos, and company names referred to in this manual are either 
trademarks, registered trademarks, service marks, domain names, logos, company names of or are otherwise the property 
of LAUNCH or its affiliates. In countries where any of the LAUNCH trademarks, service marks, domain names, logos and 
company names are not registered, LAUNCH claims other rights associated with unregistered trademarks, service marks, 
domain names, logos, and company names. Other products or company names referred to in this manual may be 

trademarks of their respective owners. You may not use any trademark, service mark, domain name, logo, or company 
name of LAUNCH or any third party without permission from the owner of the applicable trademark, service mark, domain 
name, logo, or company name. You may contact LAUNCH by visiting Launch at 

http://www.cnlaunch.com

, or writing to 

Launch Industrial Park, North of Wuhe Rd., Banxuegang, Longgang, Shenzhen, Guangdong, P. R. China., to request written 
permission to use Materials on this manual for purposes or for all other questions relating to this manual. 

Copyright Information 

Copyright © 2012 by LAUNCH TECH. CO., LTD. All rights reserved. No part of this publication may be reproduced, stored in 
a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, 
without the prior written permission of LAUNCH. The information contained herein is designed only for the use of this unit. 
LAUNCH is not responsible for any use of this information as applied to other units. 

Neither LAUNCH nor its affiliates shall be liable to the purchaser of this unit or third parties for damages, losses, costs, or 
expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this unit, or unauthorized 
modifications, repairs, or alterations to this unit, or failure to strictly comply with LAUNCH operating and maintenance 
instructions. 
LAUNCH shall not be liable for any damages or problems arising from the use of any options or any consumable products 

other than those designated as Original LAUNCH Products or LAUNCH Approved Products by LAUNCH. 

General Notice 

Other product names used herein are for identification purposes only and may be trademarks of their respective owners. 
LAUNCH disclaims any and all rights in those marks.   

 

 
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for TWC-711




















Reviews: