background image

LAUNCH                                                      KWB-421 Wheel Balancer User’s Manual 

Copyright Information 

 

All  rights  reserved!  No  part  of  this  publication  may  be  reproduced  and  stored  in  any  form  (electronic,  mechanical, 
photocopying, recording or other forms) without obtaining written permission from Shenzhen Launch Tech Co., Ltd.(hereinafter 
refers to as LAUNCH). The manual is special written for the use of this machine of LAUNCH, therefore we are not responsible 
for any use of this information as applied to other devices. 
 
Neither  LAUNCH  nor  its  affiliates  shall  be  liable  for  damages,  losses,  costs,  or  expenses  result  from:  user  or  third  party’s 
personal accident, misuse, or abuse of this unit, or unauthorized modifications, repairs, or alterations to this unit, or failure to 
strictly comply with LAUNCH operating and maintenance instructions. 
 
LAUNCH shall not be liable for any damages or problems arising from the use of other accessories or parts other than original 
LAUNCH products or LAUNCH approved products. 

 

Declaration:  Other  product  names  used  herein  are  for  identification  purposes  only  and  the  registered  trademark  ownership 
belongs to original companies. 
 
This equipment is intended for use by technical professionals or maintenance personnel.   

Trademark Information 

 

  is  a  registered  trademark  of  LAUNCH  TECH.  CO.,  LTD.  in  China  and  other  countries.  All  other  LAUNCH 

trademarks,  service  marks,  domain  names,  logos,  and  company  names  referred  to  in  this  manual  are  property  rights  of 
LAUNCH  or  its  affiliates.  In  countries  where  any  of  the  LAUNCH  trademarks,  service  marks,  domain  names,  logos  and 
company names has not been registered, LAUNCH claims its ownership for them. Other trademarks referred to in this manual 
still belong to the original registered company. You may not use any trademark, service mark, domain name, logo, or company 
name of LAUNCH or other companies referred to in this manual without prior permission from the owners. You may contact 
LAUNCH  by  visiting  its  website  at  http://www.cnlaunch.com,  or  writing  to  Launch  Industrial  Park,  North  of  Wuhe  Rd., 
Banxuegang, Longgang, Shenzhen, Guangdong, P. R. China,

 

if you have any questions. 

General Notice 

 

 

Other  product  names  used  herein  are  for  identification  purposes  only  and  may  be  trademarks  of  their  respective  owners. 
LAUNCH disclaims any and all rights in those marks.

Summary of Contents for KWB-421
















Reviews: