![background image](http://html2.mh-extra.com/html/launch/easydiag/easydiag_user-manual_3872186002.webp)
LAUNCH EasyDiag user’s manual
Precautions on operating vehicle’s ECU
z
Do not disconnect the vehicle inner consume when the ignition
switch is on, so as to avoid the sensors or the ECU damage.
z
Do not place the magnetic object near the ECU in order to
avoid the failure of the circuitry and components.
z
Do cut off the power supply of ECU system before welding on
the vehicle.
z
Pay more attention to the ECU and the sensors when the
operation is next to them.
z
Ground yourself when you disassemble PROM, otherwise
ECU and sensors will be damaged by static electricity.
z
Do connect ECU harness connector firmly, otherwise
electronic elements, such as IC inside ECU, will be damaged.
Precautions on operation
z
The instrument is a precision electronic instrument. Pay more
attention when in use, do not have it dashed.
z
The equipment power is supplied by 12v battery voltage; do
not use other voltage power.
z
Turn off the ignition switch when connect or disconnect the
diagnostic connector.
z
Please put the EasyDiag in its place on the back of the
protective casing in order to avoid lost.
i
www.greebid.com