LAUNCH
Creader 7001S/8001S English User’s Manual
15
emission-related fault.
Note: If DTCs were erased, Freeze Data may not be stored in vehicle memory depending
on vehicle.
6. O2 sensor test
The results of O2 sensor test are not live values but instead the results of the
ECU’s last O2 sensor test. For live O2 sensor readings, refer to any of the live
sensor screens such as Graph Screen.
Not all test values are applicable to all vehicles. Therefore, the list generated will
vary depending on vehicle. In addition, not all vehicles support the Oxygen
Sensors screen.
7. On-board monitor test
This function can be utilized to read the results of on-board diagnostic monitoring
tests for specific components/systems.
8. EVAP System Test
The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system.
The tool does not perform the leak test, but signals to vehicle’s on-board
computer are to initiate the test. Before using the system test function, refer to the
vehicle’s service repair manual to determine the procedures necessary to stop the
test.
9. Vehicle Info
This option displays the vehicle information, such as VIN (Vehicle identification
Number), CID (Calibration ID) and CVN (Calibration Verification Number).
5.2 System Diagnosing
This function is specially designed to diagnose the two electronic control systems
[ABS (Anti-lock Brake System) + SRS (Supplemental Restraint System)] of single
vehicle model.
