LAUNCH
X-431 Diagun III English User’s Manual
To disassemble the battery, reverse the steps that you followed to install the
battery.
Fig. a
Fig. b
Fig. c
2.6.3 Recharging Method
Use the included charger to recharge X-431 Diagun III (see the
No.10
of
table
2-1
in
chapter
2.2
for details).
2.6.4 Description of the Power Indicator State
Recharge it under conditions of power off, power on and stand-by mode.
The power indicator (green light) stays on when recharging and off when the
battery is fully recharged.
Note:
It is better to charge in stand-by mode for charging saturation. (How to
set ‘standby’: press the POWER key on the main unit, then the screen will
turn black; press the POWER key again to resume the normal state and
wake up the screen)
2.6.5 Description of the Battery State
1.
While it is being charged, " ” icon appears on the status bar.
2.
When using the appliance without connecting an external power supply,
the icon " " appears on the status bar if the battery power is higher
than 40%.
3.
When using the appliance without connecting to an external power
supply, if the battery power is less than 20%, the icon " " will appear on
the status bar. If the battery power is less than 10%, a warning message
will prompt you and the unit will be off automatically. In this case, please
charge it immediately.
10
www.obd2express.co.uk
