LAUMAS W100, Installation And User Manual

Page: 37 / 40

- 33 -
RESERVED FOR THE INSTALLER
MENU LOCKING
Through this procedure, it’s possible to block the access to any menu on the instrument.
Select the menu that you wish to lock:
press ESC and ◄ simultaneously for 3 seconds, the display shows
(the left point on the text indicates that this menu item is now locked). If the operator tries
to enter this menu, the access is denied and the display shows .
MENU UNLOCKING
press ENTER and ▲ simultaneously for 3 seconds, the display shows
(the left point on the text is off to indicate that this menu item is unlocked).
TEMPORARY MENU UNLOCKING
press ▲ and ◄ simultaneously for 3 seconds: it is now possible to enter
and modify all menus including those which are locked. By returning to weight display, the menu
lock is restored.
DATA DELETION AND PROGRAM SELECTION
WARNING : operations must only be performed after contacting technical assistance.
After each operation the display shows  , press ENTER to continue.
By pressing ESC the procedure is cancelled and no changes are made.
Upon instrument power-on hold down the ESC key until the display shows

, then proceed as
follows:
CONSTANTS RESTORE
(does not erase the calibration): confirm

, use arrow keys to select
 , set code 6935 and confirm.
 


 

 