LAUDA Water Circulation coolers
WK, WKL
YAWE0019/18.12.01
- 18 -
6.
Unpacking, assembly and setting up
Goods are packed carefully, largely preventing transport damage. If unexpectedly some damage is visible
on the equipment, the carrier, the postal authority or the railway has to be informed so that it can be
inspected.
Standard accessories:
1 Bath cover with filler opening
WKL 230
Ref-No.
EZV 070
1 Plug for filler opening,
all units (except WKL 230)
Ref-No.
EZV 086
2 Nipples 13 mm dia.
WK 500, WK 502, WKL 600, WKL 603, WKL 700,
WKL 703
Ref-No.
HKO 026
2 Screwed rings
WK 500, WK 502, WKL 600, WKL 603, WKL 700,
WKL 703
Ref-No.
HKM 032
2 Nipples ¾“ with fitting
WK 1200...WK 10000 (W),
WKL 1200...WKL 4600
Ref-No.
EOA 004
2 Nipples 1“ with fitting
WKL 7000 (W), WKL 10000 (W)
Ref-No.
EOA 036
2 hoses 4m each with quick-release coupling,
½“ at WK(L) 7000 W an ¾“ at WK(L) 10000 W
(only in case of water-cooled devices)
Operating Instructions
The unit should be set up with the operating panel at the front: the ventilation grille for the refrigerator (grille
in lower part) must not be obstructed. Ensure minimum distance of 0.5 m between grille and wall (see 4.2).
Water-cooled version
The condensation and motor heat is dissipated by a water-cooled countercurrent heat exchanger. Connect
the tubing. The connections for water inlet (from water tap) and water outlet (to the drain) are located on the
rear of the equipment at the lower side. Water inlet on the left and outlet to the drain on the right, if one
looks on the device from behind. The cooling water amount is adapted to the requirement in dependence of
the condenation pressure.
Lock the front castors where appropriate.
Check that the drain cock is closed.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com