Models S 1200, S 2400, S 4400, POU 3300, POU 3500
-
19
-
4.
Operation
4.1.
PSC Panel
The PSC front panel consists of 8 buttons, 5 main LED status lights, and one LED display.
START/STOP – Switches the module between IDLE mode and the ON state (ACTIVE mode). In the
ON state, the pump turns on, and the system either activates HEAT or COOL mode, depending
on the temperature set point and the process temperature.
REMOTE/LOCAL - Switches the system’s operation mode from tool controlled (REMOTE) to front
panel controlled (LOCAL).
CHANGE SETPOINT - Press this button to initiate a change in the process setpoint while in local
mode.
ALARM SILENCE - Press this button to mute any audible alarm, as well as clear an alarm once its
condition has been rectified.
YES, NO, BACK, ENTER - In addition to confirming or denying inquiries from the PSC, these
buttons also act as navigation keys for cycling through different menu options.
Further information on the PSC operation and functionality can be found in the PSC operation
manual.
