7 Operation
7.1
Pt100 interface
After installing the Pt100/LiBus module, the main menu for the constant
temperature equipment expands so that you can select the
External Pt100
parameter for some settings. The
External Pt100-2
parameter is also avail-
able for constant temperature equipment with two Pt100 interfaces.
Depending on the constant temperature equipment, the parameter
External
Pt100
, for example, can be selected for the following functions:
Control variable: Control the temperature control process via the
external Pt100 temperature probe.
Offset source: Control is based on the measured value provided by the
Pt100 temperature probe. However, the control set point is generated
by adding the Pt100 measured value to a specified offset value.
Follow the instructions for configuring external control variables
in the operating manual accompanying the constant temperature
equipment.
7.2 LiBus interface
After adding a LiBus interface, you can operate the constant temperature
equipment using compatible LAUDA accessories.
Always read the relevant operating manual before operating any
accessories.
V1
Interface module LRZ 918 / 925
17 / 25