Lauda LOOP 100, Operation Manual

Page: 25 / 44

5.8 Restore factory setting
Use this menu item to restore the factory settings in the device.

With All default the control parameters, internal Pt1000, and other
parameters are reset to factory settings.

With Control parameter only the control parameters are reset to the
factory setting.

With internal Pt1000 only the calibration of the internal temperature
probe is reset to the factory calibration.

With Miscellaneous all other parameters are reset to the factory set-
tings. This includes:

The range of the temperature limit values is reset to 81 °C and 3 °C.

The baud rate is reset to 9600 bauds .

Operating button locking is deactivated.

The temperature control unit is reset to °C .

The sound volume of the signal tone is reset to Loud .

The display brightness is reset to Level 5 .
1.
Select the Menu

Setup

Factory setting menu item.
2. Select the menu item for the parameter that you want to reset.
3. Press [OK] to confirm.
4. Select the [Yes] menu item.
5. Press [OK] to confirm.

The factory setting stored in the device is restored.
5.9 Viewing the device status
In the “Device status” menu item, you can have the different current tech-
nical data of your device displayed. It isn’t possible to set or change values.
You can have the following data displayed:

Error memory

The product line

The device type

The software version

The serial number

The device data with

Temperatures in the device

Pump data

Actuating signal for the heating and cooling

The operating hours.
1.
Select the Menu

Setup

Device status menu item.
2. Select the menu item for the parameter that you want to view.
3. Press [OK] to confirm.
V3 LOOP 25 / 41