5.3 Set the set temperature T
set
The set temperature T
set
is the temperature that the constant tem-
perature equipment should reach and then maintain.
T
int
is the outflow temperature of the device.
In a well-controlled system, the outflow temperature is the same as
the set temperature.
1.
Select the[Set] operating button or the
Menu
Set temperature
menu item.
2.
Enter a new set temperature.
3.
Press [OK] to confirm the new value.
The new set temperature has been accepted.
5.4 Lock and release operating buttons
The operating buttons can be locked in order to protect the device
when using a process control system or against unauthorized
access.
1.
Press any operating button on the display in order to make
the button set appear.
2.
Press and hold down the [Menu] button.
Button set switches from [Menu] to [OK].
3.
Press and hold down the [Down] arrow button within 4 sec-
onds.
4.
Hold down both buttons for 4 seconds.
In the display the descriptions of the buttons are replaced
by [---].
The entry function is now locked.
1.
Press and hold down the middle entry button.
2.
Press and hold down the right entry button[---] for 4 seconds.
3.
Hold down both buttons for 4 seconds.
In the display the descriptions of the buttons show up
again.
The device can be operated again.
Lock the operating button
Release operating buttons
Operation
LOOP
23
Summary of Contents for L 100
Page 22: ...5 2 LOOP menu structure Fig 10 Menu structure Operation LOOP 22 ...
Page 44: ......
Page 46: ......
Page 47: ......