background image

Programming Cables  
User Guide 

© 2009-2019 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at 

www.latticesemi.com/legal

 

All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 

18 

 

FPGA-UG-02042-26.2 

Technical Support 

For assistance, submit a technical support case a

www.latticesemi.com/techsupport

. 

Revision History 

Revision 26.2, May 2019 

Section 

Change Summary 

— 

Adde

Disclaimers

 section. 

Programming Flywire and 
Connection Reference 

Update

Table 6.1. Pin and Cable Reference

 

Added MachXO3D  

 

Added CRESET_B to Crosslink I

2

C. 

 

Updated items under I

2

C Port Devices  

 

Added Platform Manager II. 

 

Changed order of ispPAC. 

 

Updated items under I

2

C Port Devices. 

 

Changed Power Manager II to Platform Manager II and updated I2C: SDA value. 

 

Changed ASC to L-ASC10 

 

Updated footnote 4 to include ispClock devices. 

 

Adjusted trademarks. 

Revision History 

Updated format. 

Back cover 

Updated template. 

— 

Minor editorial changes 

 

Revision 26.1, May 2018 

Section 

Change Summary 

All 

Corrected entries in the Slave SPI Port Devices section of Table 6.1. 

 

Revision 26.0, April 2018 

Section 

Change Summary 

All 

 

Changed document number from UG48 to FPGA-UG-02024. 

 

Updated document template. 

Programming Cables 

Removed redundant information and changed link to www/latticesemi.com/software. 

Programming Cable Pin 
Definitions 

Updated Programming Cable Pin names in Table 3.1. Programming Cable Pin Definitions. 

Programming Flywire and 
Connection Reference 

Replaced Table 2. Flywire Conversion Reference and Table 3 Recommended Pin Connections 
with a single Table 6.1 Pin and Cable Reference. 

Ordering Information 

Moved Table 10.1. Programming Cable Feature Summary under Ordering Information. 

 

Revision 25.0, November 2016 

Section 

Change Summary 

Programming Flywire and 
Connection Reference 

Revised Table 3, Recommended Pin Connections. Added CrossLink device. 

 

Summary of Contents for HW-USBN-2B






















Reviews: