Latitude Pioneer, User Manual, Page: 9 / 20

Tent Assembly
Installing the Ladder
1. Flip the tent over so the side with mounting channels is facing down.
2. Align the ladder brackets over the pre drilled holes at the edge of the
bed/tent base.
3. Feed the 35mm bolts with washers from the inside of the tent and
screw on the nylock nuts by reaching inside the tent.
DO NOT TIGHTEN YET .
4. Align the ladder with the brackets. Using the 20 mm bolts and
remaining hardware ( see Diagram B ), attach the ladder and tighten.
Note: the order of the hardware should be:
Bolt - Washer - Bracket - Washer - Ladder - Nylock nut
5. Tighten the nuts attaching the ladder brackets to the tent frame.
7
Diagram B
Ladder