Latitude Pioneer, User Manual, Page: 13 / 20

11
5. To adjust the height, start with the top section,
pressing the two buttons on the ladder rung
to release the locking levers. Slide the ladder up
so that it recedes into the top rung. Repeat for
each section until the ladder is the desired height.
Be sure that the remaining sections of the ladder
are fully locked.
6. Applying the ladder canopy support pole.
Firstly, begin by pushing it into the fabric corners of the ladder canopy.
Now look at the corners of the frame. There are hinged brackets that you
will insert the end of the awning support pole into to secure it.
7. You can now locate the window awning poles.These are found in a
pocket below the window at the opposite end to the ladder There are 2
holes drilled into the frame to insert the end of the window poles. These
can be accessed through slits in the tent skirt. Insert the straight end into
the frame at about 45º angle, bend it back and insert the curved end
through the eyelet in the window awning.
THATS IT! You’re ready to camp.
Welcome, the adventure starts here!