Maintenance
Maintenance
5-1
9/27/19
Maintenance
5
SECTION 5 MAINTENANCE
5.1
Maintenance
Remove all non-essential personnel, especially children, from the
maintenance area..
Proper maintenance of your Articulator is important.
ALWAYS perform the appropriate maintenance checklist at the proper
time interval.
Failure to complete the appropriate maintenance checklists at the
proper time intervals will cause damage to your Articulator, unsafe
operating conditions, substandard performance, and may void the war-
ranty of your Articulator.
Warranty issues are dependent upon proper maintenance.
Along with completing the Pre-Operation Equipment Inspection Checklist
each time
you
operate your Articulator, complete the following Maintenance Checklists at the indicated
time intervals. (
See Section 5.12
for maintenance chart.)
5.2
Every 8 Operating Hours or Daily
Complete the Pre-Operation Equipment Inspection Checklist.
Clean off all debris that may have accumulated during operation.
NOTE:
Allow mower to cool before washing; water may be drawn into
hot bearings if cooled too rapidly. Compressed air is recommended for
removing debris.
Grease all grease zerks.
Inspect the spindle bearing grease seals (under each deck) for grease leakage or
improper seating.
Lubricate all joints and moving parts which are not equipped with grease fittings.
(
Use anti-seize for these areas).