Initial Set-Up
Hydrostatic Pump Adjustment
3-5
9/27/19
Initial Set-Up
3
4.
Use the sight gauge on the side of the hydraulic tank to fill to the “Fill Line.”
5.
Inspect the motors and pumps, the filter, tank, all hoses, clamps, and fittings, and the
entire area under the hydraulic system for leaks.
6.
Allow time for the hydraulic fluid to cool, if necessary.
7.
Repair or replace the defective parts and re-fill the hydraulic system before operating your
Articulator.
8.
Secure all clamps or fittings.
3.8
Hydrostatic Pump Adjustment
Use jack stands when adjusting the hydrostatic pumps.
Keep personnel clear of all controls while adjusting the hydrostatic
pumps.
If the drive wheels begin to creep, adjust the hydrostatic pumps as necessary.
1.
Lift the rear of the drive unit until the drive tires clear the ground.
Use jack stands for safety.
2.
Ensure steering control arms are locked in neutral position.
3.
Start the drive unit, and set the throttle arm to 3/4 full.