Initial Set-Up
Operator Seat Pan
Initial Set-Up
9/27/19
3-2
3
before operating. The fuel tanks have a gauge that shows the approximate fuel level at all
times.
Do not attempt to fuel your Articulator until you read and understand the
entire INITIAL SET-UP section of this manual.
GAS ONLY:
Use only unleaded gasoline fuel. Contaminants in the fuel can adversely
affect the fuel system.
DIESEL ONLY:
Use only No. 2 fuel. Do not use any other alternative fuel. Kerosene and
low quality fuel will adversely affect the engine. Contaminants in the fuel can adversely
affect the fuel injection pump.
DIESEL ONLY:
Do not allow either fuel tank to drain completely of fuel. This can allow air
into the fuel system. If this happens, the fuel system will have to be bled before restarting
the engine.
Refer to the
Engine Operator’s Manual
for proper instructions.
3.4
Operator Seat Pan
Always clean the entire engine area and deck area of any excess
grease, oil, fuel, or debris to prevent damage to the equipment, fire
hazard, and projectile hazards.
1.
Lift the operator seat pan all the way forward, to its maximum open position.
NOTE:
The seat pan is heavy. If assistance is required when either lift-
ing or lowering the operator seat pan, have someone help you.
CM0005-3
Seat Pan Handle
Latch