Lastec 721XRT, Owner'S Manual

Page: 49 / 58

Operating Procedures
Ground Speed
Operating Procedures Lastec//021819 4-7
4
4.5 Ground Speed
CAUTION!

Excessive ground speed over rough terrain can cause structural damage to the
Articulator.

Always drive cautiously and reduce ground speed when driving over rough terraine.
Recommended ground speed range for the Articulator is 3 to 5 MPH. Your speed may
vary within this range as your cutting conditions vary. Excessive ground speed while trav-
eling over rough terrain can cause the Articulator to bounce excessively, which in turn
increases the stress on its structure and the likelihood of damage to the machine. Thus,
while a higher ground speed is acceptable for wide, open, flat areas, a slower ground
speed is required for rough or contoured areas.
Always adhere to the tractor manufacturer's recommended ground speed range when
operating the Articulator.
4.6 Cutting In Reverse
WARNING!

Always ensure the area behind the tractor is clear of people or obstacles before
backing the Articulator and tractor.
Be sure entire area around the tractor and Articulator are clear of people or obstructions
before traveling in reverse.
If you are not familiar with backing techniques, practice in an open area to develop the
required skills before operating the Articulator.
When backing up with the articulator, with the blades on or off, you must carefully watch
the area around the articulator for obstacles, people, pets and anything that the machine
could come into contact with.
Caution
Warning