Lastec 721XRT, Owner'S Manual

Page: 34 / 58

Initial Set-Up
Mower Deck Leveling Adjustment
3
3-10 Lastec//021819 Initial Set-Up
Leveling Decks 4 and 5
Decks 4 and 5 can be leveled
by applying spacer P116 or
T104 to the ball joints as
shown in the illustration.
Spacer P116 is a 1/8th inch
spacer and T104 is 1/4th inch.
All joint spacers may need to
be arranged until the deck is in
the proper level configuration.
Additional leveling of the rear deck pans on decks 4 and 5 can be
accomplished by using the turnbuckle of the deck height adjustment
chain, as described in the following section,
Mower Deck Height
Adjustment.
Replacing Wheels
If one wheel is replaced, the wear level of the surrounding tires may cause the deck to
cant in one direction. Leveling the decks due to a tire replacement may be necessary.
Spacers on the wheel yoke assembly may be rearranged to accommodate the new tire.
See
Section 5 Wheels of the 721XRT Parts Manual for the correct spacer for the yoke of
the new tire. Additional or replacement spacers may be obtained from your Lastec dealer.
721_053B
P116 or T104
Spacer P116
or T104
721_057
721_054