3 - Setting Up Your Machine
3.5 - Attaching the Paper Side Stops
Page 07
3.5.1
Diagram 3-30
Attach the Paper Side Stops (FM4-4006) using two (2) Side Stop
Screws (FM4-4007) each. Position the Paper Side Stop as de-
sired and tighten down with light pressure.
3.6 - Attaching the Chip Bag
3.6.1
Diagram 3-40
Attach the Chip Bag (FMM6-650A) to the machine by stretching
the mouth of the bag over the Master Chip Chute and hooking
the aluminum bar onto the bracket located on the top flat portion
of the master chip chute as shown. Please note that you must
empty this bag as needed to avoid clogging.
Table
Paper Side Stop
Side Stop Screws
Chip Bag Bracket
Chip Chute
Chip Bag