Trouble Shooting Guide
Page 07
Problem
Cause
Correction
Outer Knife is out of adjusment.
Adjust per the
Maintenance
portion of this manual.
Debris is wedged between the
Outer Knife and the Disk Knife
Remove obstruction.
The Cams are adjusted too tight
against the Outer Knife.
Loosen the Cam Adjustment
Screws and rotate the Cams until
they are properly adjusted.
(See
Maintenance
)
Debris is wedged between the
Outer Knife and the Disk Knife
Remove obstruction.
The Knife Return Springs are
worn out.
Replace the Knife Return
Springs. (Always replace both
even though one may not be
worn completely)
Outer Knife is dull.
Sharpen or replace the Outer
Knife. (See
Maintenance
)
Excessive burrs appear on
the edge of the product
being cut.
The Outer Knife does not
return to the upright position
during operation.
