Page 02
All operators must read and understand the Users Manual and all other safety instruc-
tions before using this equipment. Failure to fully understand the safety instructions can
result in personal injury. If after reading the manual you are still uncertain about use,
please contact the dealer from whom you purchased the machine for assistance. If you
need contact information for a Service Technician nearest you please call 585-436-1934.
Safety of this equipment is the responsibility of the users.
This machine is designed for one person operation. Never operate the machine with
more than one person.
Do not place fingers under the Knives on the Table Assembly. Do not remove the safety
guard on the Table Assembly.
Exceeding the recommended capacity for this unit voids all warranties.
Use of the Table Assembly without the use of the CR-60 arbor press voids all warranties.
Commercial Grade Mild Steel
......................................................
0.035inch thick (0.89mm)
Soft Aluminum
..............................................................................
0.080inch thick (2.03mm)
Safety Instructions
Capacity
Remove and inspect the following items:
Loose Item Inventory
Introduction
Note:
Note:
Press Handle
5/64” Hex Key
M3 Hex Key
M4 Hex Key
Items not to scale
