8
Work Safety Instructions
Utilisation
This product is designed for cutting a stump with its above-ground part up to +700 mm and its
under-ground part in a max. depth of -600 mm under the ground level while being coupled to a
three-point hitch, category 1 or 2 and to the PTO shaft assembly for 540 rpm.
This stump cutter is designed for working in the field with max. inclination as allowed for the
tractor.
This stump cutter is designed both for manual and remote control operating at transmitter
frequency ranging from 433,05 to 434,79 MHz.
Not Allowed Use
-
This machine cannot be used for cutting of dozy stumps which could be released and
pulled out by the blades.
-
Avoid any cutting if there can be some foreign matters and objects, such as metal, glass
cullet, stony debris, ceramics etc. hidden in the stump.
-
It is strictly forbidden to start working with removed guards, particularly with a missing
rear guard of the cutting head or if this guard does not cover the head properly.
-
It is not allowed to use the cutter if other persons are within the hazardous area.
-
It is strictly forbidden to work with the
coupled machine crosswise to the
hillside.
The hatched space means the
hazardous area around
the tractor and the cuter.
Te centre of circles, as a centre of the
hazardous area, is in the centreline the
tractor and the cuter and in the connecting
line of the bottom draw rod pins.
Any working crosswise to the hillside may
bring instability of the tractor due to
cutter jib swinging and eventual hits of the
blades on the stump.
10 m
50 m
60
o
60
o
Summary of Contents for FZ560T-RC
Page 5: ...5 EC Conformity Declaration...
Page 6: ...6...
