Adjusting the gasket pressure at the
upper locking point on the locking side
(at the sash).
You can increase or reduce the gasket pressure using a Torx wrench T15, as shown below.
Adjusting the gasket pressure at other
locking points on the underside of the
sash.
Adjusting the gasket pressure at the
side of the sash at the top.
Installing the cover of the pivot-rest
Plug the long cover onto the pivot-rest
(1.).
Fasten the long cover by screwing in the
screw provided (2.) from the side.
Push the small cover at the bottom into
the pivot-rest until it snaps into place
(3.).
Installing the pivot-rest cover
1.
2.
3.
T15
T15
T15
Installation, operating and maintenance instructions
It is advisable to adjust the Fold&Slide system before mounting the cover.
7
NOTE
Also see chapter "Adjusting the Fold&Slide hardware" on page
3
.
Adjusting the gasket pressure
Installing the cover
Summary of Contents for 7012302
