Lasita Maja 7012302, Manual

Page: 31 / 37

„
Push the upper pivot-rest of the
Fold&Slide sash to be installed onto the
guide roll (1).
„
Tighten the locknut on the guide roll
with the open-end spanner (size 17)
to prevent the Fold&Slide sash from
slipping out (2).
Depending on the size of the sashes, the
upper pivot-rest can be inserted more
easily with the sashes open.
NOTE
1.
2.
NOTE
After installing each individual Fold&Slide sash, check the frame hinges of the fi rst Fold&Slide
sash and readjust if necessary.
NOTE
Installation, operating and maintenance instructions
The procedure for adjusting the gap is explained in chapter "Adjusting the bogie and guide roll"
on page
3
.
After each individual Fold&Slide sash is installed, the gap between the threshold and frame
rebate must be adjusted
.
2