COD. 83119L.01EN
09//2016
9
2. IMPORTANT INSTRUCTIONS
Installation and use of the product should be in accordance with the manufacturer's instructions, obeying
European, national and local regulations where the product is installed.
This instruction manual has been prepared by the manufacturer and it is an essential part of the product. Should
the stove be sold or transferred, it should always be accompanied by the manual as it contains information that is
necessary for the buyer and all persons involved in the installation, maintenance and use of the product.
Carefully read and understand the instructions and technical information contained in this manual before
proceeding with the installation, use and maintenance of the product. Familiarization of the instructions in this
manual ensures the safety of people and a longer life performance of the product.
In case of problems or misunderstandings of the instructions, contact the installer.
The manufacturer disclaims any liability for damage caused by failure to read the rules and instructions for
installation, use and maintenance listed in the book of instructions, unauthorized product modification or use of
non-original spares.
Installation, electrical connection, maintenance and repairs must be performed only by a qualified, authorized
person and with a proper knowledge of the product. Before the installation, check the flatness of the floor where
the product will be installed. The installation must be carried out following the instructions of chapter
“5 –
INSTALLATION”
, many of which are manufacture advices and others are taken from the current local standards
at the time of writing the manual, so if there would be any modification of the standard, or the stove is installed in a
place that is subject to different rules, it will be necessary to adapt the installation of the stove to these standards.
Use of appropriate gloves is advised when handling coated parts to avoid leaving traces that are difficult to remove
in the first cleaning. The assembly of the stove should be carried by at least two people.
Connect the stove to the mains only after connecting the chimney.
Never use liquid fuels to start the stove.
Provide sufficient ventilation during the installation. In case of malfunction, the fuel supply will be interrupted.
Restart the product only after having the cause of the problem solved. Stop using the product in case of failure or
malfunction. Do not lift the grating which lies inside the fuel hopper. Any accumulation of unburned fuel in the
burner resulting from misfire must be removed before ignition.
While the stove is working, it is recommended not to touch the hottest parts like handle, door, chimney exhaust
and glass. Due to the heat of the glass door, pay attention to keep anyone not involved in the installation away
from the stove. Inform persons in the vicinity of the stove of the necessary precautions while the product and
possible products are working.
Do not place non heat-resistant objects on the stove or within the prescribed minimum safety radius of the stove
(check chapter
“5.3.1- MINIMUN SAFETY DISTANCES”
).
Do not open the door during operation, or start the stove if the glass is broken.
For terms, limits and exclusions refer to the warranty certificate supplied with the product. The manufacturer may
make changes deemed appropriate to the stove documentation without notice, to pursue a policy of constant
development and constant renewal of the product.
This document is property of the manufacturer and cannot be transferred in whole or in part to any third party
without the written consent of the company. All rights reserved.
DIRECTIVES AND STANDARDS
All our products are manufactured according to the following directives and standards:
2004/108/CE y 2014/30/UE
2006/95/CE
Regulation UE nº 305/2011
EN 60335-1; EN 60335-2-102;
EN 61000-3-2; EN 61000-3-3;
EN 50366; EN 55014-1; 55014-2
EN 14785
