5
2.2
Setting up Net OEM step by step (manual IP-address)
The host PC must be supplied with a 100MBit network adaptor (100BASE-TX) or faster.
When working with wireless LAN, a wireless access point is required. The minimum data transfer
speed should be 54MBits/sec.
Net OEM is factory side set to the manual IP-address 192.168.0.100 at the DIP-switch.
Connect Net OEM to the network cable and switch on power supply.
Standard CAT5 patch cables can be used as well as cross over cables. Net OEM recognizes the
cable configuration automatically (Auto MDI/MDIX).
First setup the network connection at the host-PC.
Select 'Start'->'Setup'->'Network connections'
All available network connections will be displayed.
Summary of Contents for Net OEM
