Laserworld Net OEM, User Manual

Page: 22 / 66

22
On top of the show management table the mode of operation of Net OEM can be set.
The mode will be used by Net OEM after restart (power off, power on) of Net OEM.
To start sequences of the player via DMX control, 'Net OEM starts in Player Mode' must be set.
Click 'Apply' to confirm the settings.
Restart Net OEM to set it to the new mode of operation.
Operation mode will remain as long as Net OEM is set back to 'Net OEM starts in Live-mode'.
Important: Do not forget to set the right operation mode.
If Net OEM should be used as standalone player without the use of a PC, player mode must be set.
Otherwise, Net OEM will not respond to DMX-signals!
Set operation mode to 'live' mode if you want to control Net OEM via host-PC and lasershow
software.
If all files and parameters in show management are set, DMX channels (address) must be
configured. See the following chapter.