15
2.6.2 Alternative access to Net OEM via web browser
Here is an alternative method to access the web interface of Net OEM in automatic mode, for
example if UPnP does not work on your system.
Open the command line in Windows and type
arp /a
You now get a list of all connected devices.
If more devices are connected, you can identify Net OEM by the MAC-address.
This address is printed on a label on each Net OEM card.
If you don't know the MAC-address of Net OEM, you have to try all shown IPs.
Type the IP-address in your web browser.
If the right IP is selected, the start up page of Net OEM opens.
Important: After adding or removing network devices, the dynamic IP-address may be changed.
If no more access to Net OEM is possible, check the address entry again in command line mode.
Summary of Contents for Net OEM
