Manual: Club Series CS-1000RGB / CS-2000RGB/ CS-1000RGB SE / CS-2000RGB SE / CS-4000RGB / CS-4000RGB SE
page 10 / 21
9.
Please note that not each pattern can be combined with each effect.
10.
ILDA control:
Connect your device („ILDA IN“) via an ILDA cable to an interface / controller. Use a
laser control software, e.g. Phoenix or Pangolin, to run the device. Use „ILDA OUT“
to connect it to another device.
11.
To turn off the device switch it off („OFF“) and disconnect the power cable from the
mains.
