Page 45
Step 4. (Tab )
Pen.
B
The second tab you come to is called
This is where you will set up the power and speed that you would like the laser to run at for
the different materials (refer to the Engrave and Cut settings at the back of this manual). To input the settings simply move the slider bars left
or right for the required settings.
Adjust the slider bars here
to set the speed, power and
PPI (Pulses Per Inch).
The PPI numeric setting is
used for ENGRAVING.
For CUTTING, adjust the
slider to the far right, this
will change from a numeric
value to X.
(X equals a constant firing
beam).
Leave the raster and vector
boxes ticked at all times.
B
