Page 21
If you are using
to output your designs to the laser cutter then you will need to complete the following setup to ensure that communication
Techsoft 2D Design Version 2
can be established between the software and the laser cutter. Please perform this setup under
full administration rights
.
Step 1
Setup’
. Open up 2D Design V2 on your computer and select ‘
from the tool bar at the top of the screen.
Step 2
customise’
‘operation’.
. On the drop down menu that appears simply go down to ‘
and then across to the right to
(this will open up a new window)
Note:
If you are unsure whether or not you are operating from Version 2 of Techsoft 2D Design then simply open up 2D Design and select
from the top tool bar and then select
. This will now open a box that shows which version of 2D you have.
‘help’
‘about 2D Design’
Techsoft 2D Design Version 2 Setup