Page 40
You will now see that your image has changed to a greyscale image. Scale the image to the desired size then proceed to ‘
File
’ on the top toolbar and select ‘
’.
Step 5.
Follow your normal setup ie. setting the colours and page size in CorelDRAW. Setup the printer driver the same as you normally would but when
you select the options tab, select the greyscale engrave mode called
Black and White
and a new tab called
Raster
will appear in the print properties.
Contrast.
This is where
you can adjust the darkness
and lightness of your image
by using the slider bar.
Error Diffusion.
For best
results when engraving
bitmaps tick on error diffusion.
Dithering.
This engrave mode will
print in a dot matrix style.
