LED Ultra Sign Instruction Manual
00625-53-000
Page 7 of 13
Issue 4.1 19 January 2021
Lasermet also supply a range of shallow surface trays which can accommodate multiple signs
arranged vertically. Each tray has a Ø20mm cable/conduit entry which must be located at the top.
Additional holes may be cut if required. The trays allow convenient hook-on mounting and electrical
connection to the signs.
To attach the signs to the wall tray, start with the bottommost sign, hang it on the hooks provided
on the wall tray and secure using two M4 X 12 screws in the bottom two fixing holes in the sign.
Make the wiring connections next, then lay a joining strip along the top of the first sign before
proceeding to fit the next one.
Figure 2. Mounting Arrangement using 3-way Wall Tray
