ICS-6-DLSM Instruction Manual
01692-53-000
Page 5 of 20
Issue 3 30 January 2020
Lasermet provides a full range of laser interlock equipment including control systems, interlock
switches, illuminated warning signs, laser shutters, door locks, external power supplies etc. which
can be connected to provide a complete laser interlock system. Full support, design and installation
is available from Lasermet, please contact us for any queries. Contact details are given at the end of
this manual.
3
Installation
The unit is contained within a wall-mountable box. The size and fixing centres are given in the
diagram on the next page.
The box should be fitted to the wall in such a position that the front panel indications can be seen
within the ‘B’ area when the room divider is closed, and from both areas when the divider is open.
The box should be mounted with the long sides horizontal normally cable entries will be at the top
or bottom and this makes the longer sides available for this purpose.
A large number of low voltage cables will need to be taken to the unit. The unit can accept cable
entries on all four sides and consideration should be given to cable routing and entry when
positioning the unit. The unit is powered from low voltage supplies from the two ICSs and no mains
supply is needed.
