LaserLiner ThermoSpot-Vision, User Manual

Page: 16 / 224

16 GB
Camera mode Alarm High enabled
IR measurement active Alarm High exceeded
IR measurement stop-
ped
Alarm Low enabled
Laser active Alarm Low exceeded
Camera mode 9
After selecting camera mode, the live image recorded by the camera is shown on the display. Infrared
measurement is started by pressing the trigger. The following measured values and symbols are shown on
the display:
AT Ambient temperature MIN Min value
DP Dew point temperature MAX Max value
RH%
Relative humidity
DIF
Differential value
(max-min)
WB Wet-bulb temperature AVG Average value
E Emissivity coef Ƃ cient
Value in
middle
Surface temperature
Recording images/videos
10
Images or video sequences of the measuring situation can be recorded during IR measurement.
Before recording image data or video sequences, check the storage medium to be used to store the
data. See Settings under Point 7.
!
Still image
1. Record
2a. Save image:
2b.
Cancel:
Video
1. Record
2a. Start recording:
2b.
Cancel:
3.
Stop recording
IR measurement and laser are triggered automati-
cally during video recording. The recording status
is indicated by the recording symbol at the top left
of the display together with the recording time.
You can open, preview and delete recorded videos
under "Gallery" (see Point 13). You can open, preview and delete recorded
images under "Gallery" (see Point 13).