08
Calibration
The measuring device should be calibrated and tested on a
regular basis to ensure it is accurate and working properly.
We recommend the measuring device is calibrated every
1 - 2 years. If necessary, contact your distributor or the
UMAREX- LASERLINER service department.
The zero setting must be checked prior to every
use by sliding the measuring jaws together.
EU directives and disposal
This device complies with all necessary standards for
the free movement of goods within the EU.
This product is an electric device and must be collected
separately for disposal according to the European
Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info/?an=AIV
Technical data
(Subject to technical changes without notice. 19W45)
Measurement range
0 … 150 mm
Resolution
0.1 mm
Accuracy
± 0.2 mm
Power supply
1 x 1.5V LR44 (AG13)
Operating conditions
0°C … 40°C, max. humidity
80% rH, no condensation, max.
working altitude 4000 m above
sea level
Storage conditions
-20°C … 70°C,
max. humidity 80% rH
Dimensions (W x H x D)
240 x 80 x 16 mm
Weight
50 g (incl. battery)
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning
agents, scouring agents and solvents. Remove the battery(ies)
before storing for longer periods. Store the device in a clean
and dry place.
EN
