LaserLine QUAD 4000, Owner'S Manual

Page: 4 / 16

2 QUAD 4000
The Quad 4000 long range layout and control laser system with LineLokr Technology (LLT) enables you to
square your job, control elevation, snap your lines and plumb a structure with just one person, using just one
laser, and often from one setup. The Quad 4000 was designed from the ground up to provide accurate layout
and control functions while at the same time being easy to use.
LineLokr Technology (LLT) is the cornerstone of the system for layout, Line control, squaring and plumbing. The
LineLokr communicates with the Quad 4000 laser automatically driving the laser to centerline and holding it
there all day long. Line, square and plumb will not drift off because it is always being monitored and corrected
back to line via the LineLokr communication.
THE LASERLINE 4000 QUAD PROVIDES
• Level control covering a 1500 foot radius
• Line Control to ± 1/16 inch @ 600 feet
• Squaring left and right from center to
within ± 1/16 inch per 100 feet
• Plumb control to within ± 3/32 per 100
vertical feet
The Quad will automatically default to
vertical control when turned on. You
can select horizontal only or vertical
and horizontal using the “Mode”
button on the far left.
V E R S I T A L | A C C U R A T E | E A S Y T O U S E
THE SYSTEM OVERVIEW