44
One or all output can be set for provide a ground signal intermittent in alarm phase for
commanded via rel
the horn of the vehicle.
ay
One or all output can be set for provide a ground signal for ‘’X’’ seconds in presence of one
code dedicated on data line of the vehicle .
ELECTRICAL CONNECTIONS
CODIFICATED SIREN OUTPUT (Empty position n.23)
ou put programmable. See the
t
programmable function via PC
Def ult setting; The output is set for send a series of data of self-powered siren Laserline,
a
(The line transmits acoustic arming and disarming signals, recharging the internal battery,
ect...)
Other programmable function:
The output is set to provide a timed ground signal when the product is in the alarm phase
(sound cycle).
The output can drive a external buzzer for
function like anti-theft (buzzer 12 volt)
special
OUTPUT
• YELLOW/BLACK WIRE:
output programmable via PC
1) Default setting; The output is set to provide an impulsive ground signal in the alarm phase to
activate the emergency button, ‘’hazard’’.
• WHITE WIRE :
output programmable via PC
1) Default setting; The output is set to provide a constant signal of ground when the product is
armed. This signal is used for the abilitation a window regulator module or a satellite alarm, the
output can be temporized for windows closing in comfort mode.
• BLUE/BROWN WIRE:
programmable output via PC.
1) Default setting; The output is set for provide a temporized signal of ground when the product
is in alarm phase. This signal is used for a traditional siren with negative command or for
indicate a alarm to one satellite device.
Other programmable settings for exit pins 19, 20, 21, 22
One or all outputs can be set for provide a ground signal impulsiv in alarm phase for activate
e
the hazard button .
One or all outputs can be set for provide a temporized negative signal when the product is in
alarm phase.
One or all outputs can be set for provide a ground constant signal till when the vehicle is
closed (product armed)
One or all of the outputs can be set to provide a ground signal for a set time of 10, 25 or 45
seconds after the vehicle has been closed (comfort glass closing).
One or all of the outputs can be set to provide a ground signal when the handbrake of the
vehicle is activate . If the device read the presence of brake data on the can bus network; the
system will provide the signal on this wire in the presence of the active handbrake.
One or all the outputs can drive an external buzzer for particular functions such as anti-
robbery function. (buzzer 12 volt)
Summary of Contents for LC800
Page 32: ...NOTE 32...
Page 66: ...66...
