53
PASSIVE ARMING OF THE ALARM
- Enabling this function allows you to automatically arm the system without closing the doors (except
for the version with 433MHz radio?) If the ignition is turned off and the door is subsequently opened
and closed. The arming is 70 sec after the closure of the latter
By opening a door (or trunk or hood) during the 70 sec, the time counting is stopped and resumed
when it is closed again.
SWITCHING ON THE DASHBOARD:
The detected of power signal is detected always from wire
phisicaly and depending on the car also from the can bus network.
The alarm cycle of this sensor can be excluded via programmation , function that allow to avoid
indesiderate alarm at power on from remote of the vehicle
The alarm is repeated if the contact is leave open after the end of last cycle.
The alarm cycle is repeated a 10, and are ripristinate after the next arming
OTHERS OPERATION MODE OF THE ALARM
