laserglow.com/industrial
Section 1: Safety Information
READ THIS FIRST
Keep flammable materials away from the fixture (minimum distance to flammable material is 1 foot / 30 cm).
Place the Virtualine™ LED SWITCH in a location that has good air flow.
Do not look directly into the light source; it is extremely bright.
Always disconnect the fixture from power before performing any service on the unit.
ELECTRICAL SAFETY
Use only a power source that complies with local building and electrical codes and which has both overload
and ground-fault protection.
Disconnect the fixture from power before handling.
Do not use the fixture if the power cable or power plug is in any way damaged, defective, or wet, or if they
show signs of overheating. If the power cable or plug for the fixture is damaged, it must only be replaced by
Laserglow or an authorized service agent to avoid an electric shock or fire hazard.
The light source contained in this luminaire shall only be replaced by Laserglow or an authorized service
agent.
Light fixtures should be installed and maintained only by qualified personnel with experience in lighting
equipment and general electrical experience.
When suspending the fixture above ground level, verify that the structure can hold at least 10 times the
weight of all installed devices. Use the safety cable to secure the fixture in addition to the primary mounting
bracket.
The Virtualine™ LED SWITCH is suitable for indoor use only.
VirtuaLine™ SWITCH LED Line Projector
