laserglow.com/industrial
Section 2: Unpacking and Inspection
This product was shipped to you wrapped in a double-walled box to protect it from damage during storage and transit.
However, unexpected things can occur during shipping, so it is important to inspect and test your product as soon as it
arrives. Claims for shipping damage must be made within 7 days of receipt. Beyond this time, any damage to the product
will be considered to have occurred while it was in your possession, which may void your warranty.
2. Unpack the Virtualine™ LED SWITCH and power supply:
Carefully remove the projector from the box
and inspect it for any physical damage which may have occurred during shipping, then do the same for the
power supply and relay box. If any physical damage or moisture is present, contact Laserglow immediately to report it.
1. Inspect the shipping carton:
Look for obvious signs of damage or exposure to moisture. If either are
present, contact Laserglow immediately for instructions on how to proceed. In the unlikely event that the
product is damaged this information may be important for filing a claim with the carrier.
3. Check the contents of the shipment against the packing list:
Every fixture¹ includes a mounting
bracket², power supply³, and a relay box
4
. If you ordered multiple products, check the packing list and make
sure that all of the listed items are present. If everything is included and there is no evident damage, proceed
through this manual for instructions on how to set up and install your Virtualine™ LED SWITCH. If there is
any discrepancy, please contact Laserglow immediately.
2
1
3
VirtuaLine™ SWITCH LED Line Projector
4
