Laser STB-8000-026, User Manual

Page: 9 / 22

6
‹†‡‘ƒ†—†‹‘‘‡ –‹‘
‘‡ –‹‘‡–Š‘†ͳǣ‘’‘•‹–‡
The composite cable (supplied) comprises of 1 x Video Cable (yellow), 1 x Left Channel Audio (White) cable and 1 x
Right Channel Audio (Red) cable.
Best Used for: Older CRT Type televisions or other displays with only a standard AV input.
‘‡ –‹‘‡–Š‘†ʹǣ
HDMI (High-Definition Multimedia Interface) is the preferred connection method as the HDMI cable (not supplied)
allows full HD Digital signal transmission to the TV.
Best Used For: Any TV that has an HDMI input.
—†‹‘‘‡ –‹‘
Audio can be connected to an external amplifier / receiver. Connect the Stereo Left and Right channels (White &
Red) to the back of the Set Top Box and the corresponding inputs on the back the audio device.
FIRST TIME INSTALLATION
Once the STB-7000 has been connected to the power and to the
TV and after all audio connections have been made properly,
switch on TV.
Press Power button to switch the Set Top Box (STB) unit on.
If you are using the unit for the first time or have restored the
unit to Factory Default, the Installation Guide Menu will appear
on your TV screen.
ƒ‰—ƒ‰‡
To set the OSD (On Screen Display) Language press the LEFT/RIGHT buttons on the remote until the desired
Language is displayed and then press the DOWN button.
‘—–”›
To change the Country, press the LEFT/RIGHT buttons on the remote until the desired Country is displayed and then
press the DOWN button.
Šƒ‡Ž‡ƒ” Š

Press OK to start the Channel Auto Search.
 The System will now scan for the available channel in your area.
 Found DVB-T Channels are shown in the left window and radio stations are displayed in the right.
 Total progress is displayed in the bar below.
 Press the EXIT or Menu Button to stop the scan at any time.
 Once the Scan is complete the first Station is shown.
•
Set the Channel Search type to "FTA + Scrambled"
Channel Search
STB-8000-026