Fig. 3 DMX-channel selection
Showselect L
This DMX-function cannot be disabled!
Input here the channel for show selection.
When just this channel is used for show selection, one of the first 16 shows (including
Pause) can be selected.
Showselect H
Input the channel number corresponding to this function here.
16 banks of shows, 16 shows each, can be selected using this function.
When DMX-control of this function is disabled, only shows number 0 (pause) to 15 are
selectable from the control desk.
Speed Kpps
Input the channel number corresponding to this function here.
This function controls the output speed (points per second).
12
The POSEIDON can output a maximum speed of 30000 points per second and 1000
points per second minimum.
Keep in mind that changing the point output speed also will change the speed of the
displayed animation and also will influence the blanking settings (blank shifting). For this
reason, the speed should be adjusted carefully.
When DMX-control of this function is disabled, the value set in the showtable individual
for every show is used.
Framerepeat
Input the channel number corresponding to this function here.
Shows in ILDA-format do not contain any timing information. When all frames of a show
are outputted one after the other, the animation speed is too fast.
By repeating every frame a number of times, the speed of the animation movement can
be controlled. Common used values are 3-6. Values by DMX-control are 1 to 16.
When DMX-control of this function is disabled, the value set in the showtable individual
for every show is used.
Size (projection size)
