background image

Laser Technology, Inc. TruPulse L2 User’s Manual 1st Edition

Section 9 - LTI Limited Warranty

Page 27

Copyright© 2023, Laser Technology, Inc. All rights reserved.

Section 9 - LTI Limited Warranty

What is Covered?
Laser Technology, Inc. (LTI) warrants this product to be in good working order. Should the product fail to be in good working 
order at any time during the warranty period, LTI will, at its option, repair or replace this product at no additional charge.

Parts and products that have been replaced as a result of a warranty claim become the property of LTI.

What is the Period of Coverage?
This warranty remains in force for two years from the date of purchase from LTI or an authorized LTI product dealer; 
unless otherwise noted by LTI at the time of sale. LTI reserves the right to require written verification of the date of 
the original purchase of any product.

What is Not Covered?
LTI has no obligation to modify or upgrade any product once sold. Any reproduction of software products is strictly forbidden. 
This limited warranty does not include service to repair damage to the product resulting from:

Accident

Disaster

Misuse

Abuse

Non-LTI modification

Batteries or damage caused by batteries used in our products.

In no event will LTI be liable to you for any damages, including any lost profits, lost savings, or other incidental or 
consequential damages arising out of the use or inability to use such product. Furthermore, LTI shall not be held 
responsible if an LTI authorized dealer has been advised of the possibility of such damage, or for any claim by any other party.

What Will We Do to Correct Problems?
If this product is not in good working order as warranted above, your sole remedy shall be repair or replacement as provided 
above.

How does State Law Relate to this Warranty?
LTI hereby disclaims all other express and implied warranties for the product, including the warranties of 
merchantability and fitness for a particular purpose. Some states do not allow the exclusion of implied warranties, 
so the above limitations may not apply to you.

 

How do You Get Service?
In the unlikely event that your LTI product should require warranty or repair service, contact us to receive 
a Return Merchandise Authorization (RMA) number before returning your product.

If the product is delivered by mail, you agree to insure the product or assume the risk of loss or damage in transit. 
In addition, the shipping container or equivalent, will be sent prepaid and for door-to-door delivery.

Why Should You Complete and Return the Warranty Validation Card to LTI?
The Warranty Validation Card (shipped in the box with your TruPulse) must be completed and received by LTI 
in order to benefit from this limited warranty. If an LTI software product requires registration, this must also 
be completed to benefit from this limited warranty. Receipt of the warranty validation card not only activates 
the limited warranty, it also allows LTI to contact you directly when hardware or software upgrades become available.

If you prefer to register your LTI product electronically, please visit our website 

(www.lasertech.com/Warranty-Registration.aspx)

Summary of Contents for TruPulse L2































Reviews: