Laser Technology, Inc. TruPulse L2 User’s Manual 1st Edition
Section 7 - Care & Maintenance
Page 25
Copyright© 2023, Laser Technology, Inc. All rights reserved.
Section 7 - Care & Maintenance
The battery is the only user-replaceable parts in the TruPulse L2. Do not remove any screws.
To do so will affect or void the LTI Limited Warranty.
•
Temperature Range
The instrument is rated for an operating temperature range of -5° to +60º C (23° to 140° F);
Storage -25 to 60 degrees C (-13° to 140° degrees F). Do not expose the TruPulse L2 to temperatures
outside this range.
•
Protecting from Moisture and Dust
The TruPulse L2 is sealed to provide protection from normally expected field conditions.
It is protected from dust and rain, but will not withstand submersion.
If water leakage is suspected:
•
Power OFF the TruPulse L2.
•
Remove the battery.
•
Air dry the TruPulse L2 at room temperature with the battery compartment open.
•
Protecting from Shock
The TruPulse L2 is a precision instrument and should be handled with care. It will withstand
a reasonable drop shock. If the unit suffers from a severe drop shock, you may need to send
the unit to LTI for service repair.
•
Transporting
When transporting the TruPulse L2, the unit should be secured in the provided carrying case.
The provided neck strap can be used when carrying the TruPulse L2 in the field.
•
Cleaning
Clean the TruPulse L2 after each use, before returning to the carrying case.
Check all of the following items:
•
Excess moisture.
Towel off excess moisture, and air dry the instrument at room temperature with
the battery removed and the battery compartment open.
•
Exterior dirt.
Wipe exterior surfaces clean to prevent grit buildup in the carrying case.
Isopropanol may be used to remove dirt and fingerprints from the exterior.
•
Transmit and Receive Lenses.
Use the provided lens cloth to wipe the lenses.
Failure to keep the lenses clean may damage them.
•
Storing
If you won't be using the TruPulse L2 again soon, remove the battery before storing the instrument.
