WALLY AC EV Charging Station User Manual
DOC ID: UM210801.A0 25
6.4.
Start charging
a)
Park the electric car into place, turn off the engine,
and put the car under braking.
b)
Pick off the charging adapter and is shown as Fig.
6-7.
c)
Plug the charging adapter into the AC charging
socket of the electric vehicle and the “Connect”
light of the charging station will be lit.
Fig.6-7 Pick off the charging connector
d)
For “plug-and-charge” charging station, it will automatically enter the charging process; for “swipe
card-controlled” charging station, it needs to swipe card to start; for APP-controlled charging
station, it needs to operate mobile phone to start.
e)
When the “Charging” light begins to flash, the pile will enter the charging state.
6.5.
Normally stop charging
a)
There are two normal stoppages for “plug-and-charge” charging station: first, automatic stoppage
with full charge, and second, manual stoppage.
b)
Operation of manual stoppage: press the unlock button of
the remote key of the electric vehicle, the vehicle will stop
charging (requires the support of the electric car), if the
charging is not stopped, press the button of the adapter
again (as shown in Figure 4-5), the charging station
“Charging” indicator will go off, and the charging will stop
automatically.
Fig. 6-8 pull adapter out the vehicle
c)
Pull the adapter out of the vehicle to complete charging process. If you can't pull out the adapter,
usually because the vehicle is locked, press the unlock button of the vehicle key and the adapter
can be pulled out.
Note:
✓
For “swipe card-controlled” charging station, please start and stop charging by swiping your
card.
✓
For “APP-controlled” charging station please start and stop charging through your APP.
